Skip to content

Palbot Setup Guide

What is Palbot?

Palbot connects to your Palworld dedicated server using RESTAPI to execute remote commands and gather information. It can also utilize RCON if enabled.

1. Enable REST API

To allow Palbot to communicate with your server, RESTAPI must be enabled.

  1. In the same PalWorldSettings.ini file, ensure this section is enabled:
AdminPassword="YourPassword",RESTAPIEnabled=True,RESTAPIPort=8212
  • AdminPassword: Set a strong admin password.
  • RESTAPIEnabled: Must be set to True.
  • RESTAPIPort: Default is 8212.

2. Enable RCON (Optional)

RCON Port is required for the /palcon command.

  1. Open your PalWorldSettings.ini file.
  2. Make sure the following settings are present and configured:
AdminPassword="YourPassword",RCONEnabled=True,RCONPort=25575
  • RCONEnabled: Must be set to True.
  • RCONPort: Set the port; default is usually 25575.

3. Add Your Server to Palbot

Use the /addserver command in Discord and fill out the following fields:

  • Server Name: A unique name for your server (can be anything).
  • Host: The address used to connect (example: 127.0.0.1).
  • REST API Port: The port used for the REST API (if enabled).
  • RCON Port: The port you configured for RCON. (optional)
  • Password: The RCON admin password.

4. Test Your Setup

  • Use /serverinfo to test REST API connectivity.
  • Use /palcon command:info to test RCON connectivity.

If both return results, your setup is complete!